小型直喷式柴油机喷雾特性的试验研究 钱耀义 李云清 于秀敏 铃木胜义 摘 要:为了掌握喷雾的结构和特性,利用高速摄像装置和高压容器,拍摄了喷雾的逆光图像,并研究了喷雾周围介质压力对喷雾贯穿距离、喷雾锥角以及蒸发等喷雾特性的影响。在液滴数密度较大的条件下,燃料液滴的蒸发速率受传热过程和雾化质量的影响;喷射初期喷雾的贯穿距离和贯穿速度几乎不受介质压力的影响;喷雾的贯穿距离受喷油压力的影响不大,但随着喷油压力的提高,喷雾锥角增大,喷雾质量得到改善。 An Experiment Study on Fuel Spray on Small Direct Injection Diesel Engine QIAN Yao-yi(Dept.of ICE Engineering,Jilin University of
Technology,Changchun 130025,China;) Abstract:For investigation of
fuel spray structure and characteristics,by means of high-speed video camera and
high-pressure chamber,the spray shadow pictures are taken,and the effects of medium
pressure are researched on the spray penetration length,cone angle and evaporation
characteristics.When the droplet number density is big,evaporation rate of the droplets
are influenced by the heat transfer process and atomization quality.At initial time of
fuel injection,the spray penetration length and its velocity are not dependent on the
medium gas pressure. |
| 作者简介:钱耀义(1935-),男,教授,主要研究方向为内燃机现代设计理论
作者单位:钱耀义(吉林工业大学 内燃机系,吉林 长春 130025) 李云清(吉林工业大学 内燃机系,吉林 长春 130025) 于秀敏(吉林工业大学 内燃机系,吉林 长春 130025) 铃木胜义(日本山形大学 工学部) 参考文献: [1]LI Yun-qing,QIAN Yao-yi,SUZUKI
Katsuyoshi.The Effects of Ambient Pressure and Injection Pressure on Spray Structure[C].JSAE,9830048. 收稿日期:2000年3月26日 修稿日期:2000年6月12日 出版日期:2001年3月25日 |